中文
EN
- Product
- fire engine
- New energy vehicle
- Sprinkler
- Dust suppression vehicle
- Sewage suction truck
- fire engine
- Fecal suction truck
- Road sweeper
- Washing and sweeping vehicle
- High pressure cleaning vehicle
- Kitchen garbage truck
- Cleaning suction truck
- Road clearing vehicle
- garbage dump truck
- Swing arm garbage truck
- Docking garbage truck
- Compression type garbage truck
- Mobile compressed garbage station
- Hook arm garbage truck
- Truck with crane
- Platform car
- Personnel carrier
- hydraulic aerial cage
XZL5180ZBS6 Swing arm garbage truck
| |||
Product trademark | zhong jie | Notice Lot | 331 |
Product name |
| Roduct number | APLGK6FT028 |
Total mass(Kg) | 18000 | Volume of tank(m3) | |
Rated loading capacity(Kg) | 11150,10955 | Dimensions(mm) | 7350×2490×3350,3150 |
Chassis kerb mass(Kg) | 6655,6850 | Container size(mm) | ×× |
Passenger carrying capacity | Total mass of quasi Trailer(Kg) | ||
Passengers | 3 | Utilization factor of payload | |
Approach/departure angle(°) | 19/12 | Before hanging / rear overhang(mm) | 1260/2140 |
Controlled axis | 2 | Wheel base(mm) | 3950 |
Axial load(Kg) | 6500/11500 | Maximum speed(Km/h) | 105 |
Other | 1,This model is mainly used for garbage cleaning of various supporting swing arm boxes, 2,And the main device is swing arm mechanism 3,Original air conditioner, steel tire, ABS | ||
Swing arm garbage truck chassis technical data | |||
Chassis models | EQ1185LJ9CDE | Chassis category | Truck chassis (class II) |
Brand name | Dongfeng | Manufacturer | Dongfeng Motor Co., Ltd |
Dimensions(mm) | Wheel number | 6 | |
Approach/departure angle(°) | 19/13,19/17 | Tire type | 10.00R20 |
Number of Leaf Springs | 8/10+7,8/- | Front track(mm) | 1862,1933,1949 |
Types of fuel | Diesel fuel | Rear track(mm) | 1806,1865 |
Emission standard | GB3847-2005,GB17691-2018State VI | ||
Engine model | Engine production enterprises | Displacement(ml) | Power(Kw) |
D4.0NS6B195 YCS04200-68 | Dongfeng Cummins Engine Co., Ltd Guangxi Yuchai Machinery Group Co., Ltd | 4000 4156 | 143 147 |
1,Since the loading and unloading system for loading along the telescopic arm, hydraulic drive, hydraulic system pressure is 32MPa.
2,The use of hydraulic control proportional control (cab) and direct manipulation (outside the cab) two kinds of control methods.
3,Self-handling system installed by the subframe on the car chassis beam.
4,Since the handling system can be reversed with a scalable two boxes "L" shape, and telescopic boom lift cylinders and telescopic cylinders, the rear frame above the cylinder, Vice beam with a stable, to improve the whole vehicle longitudinal stability.